Model NO.: RUNTONG
Thickness: 1-1.5mm
Surface: Smooth or Textured
Trademark: RUNTONG
Origin: Dezhou China
Material: HDPE
Weild Size: 330~1000mm
Port: Qingdao
Specification: ASTM
HS Code: 39219090
Road Construction HDPE Geocell Supplier
HDPE Geocell Is a new type of high-strength geosynthetics, which is popular in domestic and abroad. It is a kind of three-dimensional network structure shaped by high-strength HDPE sheets through ultrasonic welding of high strength. Currently, it is being widely used in construction, such as highway, railway, bridge, dyke, etc.
HDPE Geocell Execution standard
GB/T 19274-2003
Tensile strength EN ISO 10319
Elongation at maximum Load EN ISO 10319
HDPE Geocell Features
Light weight, wear-resistant, chemical stability, light oxidation aging, anti-acid/alkali corrosion, applied to different geological conditions, such as saline soil, desert, etc.
Wide temperature range, high tensile strength, good rigidity and toughness, good load capacity and anti-erosion ability.
Size is relatively stable, change the height and welding distance can meet the needs of different projects.
Retractile, easy to transport.
Easy to use, can use the local materials and achieve rapid construction, reduce construction costs.
Can be used repeatedly.
HDPE Geocell Application
To stable the roadbed of highway/railway.
To bear the load of dyke, retaining wall.
To improve the watercourse of shallow river.
To support the pipeline and sewer.
To be used as independent wall, wharf and breakwater, etc...
To be used for the regulation of the desert, beaches, river bed and river bank.
HDPE Geocell Methods used
In construction, the geocell can be pulled into a network and launched into a three-dimensional honeycomb grid, then filled with soil, macadam, concrete or other granular materials to constitute to be a structure with strong lateral restriction and large stiffness.
HDPE Geocell Concrete construction method
Open the superimposed geocell.
Fixed with nails or connected with the framework of stretching device.
Fill the particle filler until the full and beyond standard room to the top, then vibrate or roll to finish the primary work.
At this point, cell chamber system can support all kinds of construction equipment. The construction can be done directly in the above.
Packaging & Delivery
Packaging Detail: The products are usually packaged by packing tape; The packing size and the capacity of the containers is different from the specification of the products. We will package and transport the products according to the requirements of the buyers.
Delivery Detail: According to the order quantity but normally within 15 days.
FAQ
1. How about the delivery time?
Lead time since receipt of 30% T/T deposit payment: 3 weeks.
(Samples will be prepared within 3 days. )
2. What kind of payments does jenor support?
T/T, L/C are accepted.
3. What's are the MOQ?
Generally speaking, the MOQ is one container, but we can provide you samples for quality inspection.
4. Do you charge for the samples?
Accordeing to our company policy, the samples are freee, we only charge the freight fee. And we will return the freight fee during the next order.
5. Can you produce according to customers' design?
Sure, we are professional manufacturer, OEM and ODM are both welcome.
6. Can you tell me your main customers?
That's our customers' privacy, we should protect their information.
At the same time, please rest assured that your information is also safe here.
Thank you for your visiting!
Our Service
Other products:
Polypropylene biaxial geogrid , plastic mesh grid,
Polyester Geogrid,
Fiberglass Geogrid, polypropylene staple fiber needle punched non-
woven geotextile felt, Polypropylene non-woven fabric for road,
non woven geotextile felt, pp
Non Woven Geotextile, pet non
Woven Geotextile, short fiber non Woven geotextile , HDPE Geomembrane ,
LDPE Geomembrane, geocomposite geogrid,
Composite geomembrane, biaxial geogrid suppliers
| Product Type | Height(mm) | Welding Distance(mm) | Thickness
(mm) | Seam Peel Strength of Welding Points(N/cm) | Tensile Strength of Connection of Cells(N/cm) | Tensile Strength at Yield of Each Sheet(N/Mpa) |
| Flat and Not Perforated | 50≤H≤250 | 330≤A≤1000 | 1.1/1.2 | ≥100 | ≥120 | ≥20 |
| Flat and Perforated | 50≤H≤250 | 330≤A≤1000 | 1.1/1.2 | ≥100 | ≥120 | ≥20 |
| Embossed and Not Perforated | 50≤H≤250 | 330≤A≤1000 | 1.5 | ≥100 | ≥120 | ≥20 |
| Embossed and Perforated | 50≤H≤250 | 330≤A≤1000 | 1.5 | ≥100 | ≥120 | ≥20 |
Remarks :
Width of the product can be made according to the customer's demand, and the other special standards will be carried out by agreement or contact. (The product has passed CE & GOST-R & SGS certification) |
Geocell welding mold-digit |
HJM-11 |
HJM-14 |
HJM-15 |
HJM-18 |
HJM-22 |
No.of welding heads |
11 unit |
14 unit |
15 unit |
18 unit |
22 unit |
Max. Power |
28.6KW |
36.4KW |
36.6KW |
46.8KW |
57.2KW |
Ultrasonic Vibrating Power |
16.5KW |
21KW |
23KW |
27KW |
33KW |
SIZE OF THE EQUIPMENT (L*W*H)(M) |
6.5*1.89*2.26 |
7*1.89*2.26 |
8*1.89*2.26 |
8*1.89*2.26 |
9*1.89*2.26 |
WEIGHTNESS |
5TONS |
5.5TONGS |
5.8TONS |
6TONS |
6.5TONS |
POWER |
AC380V N 50-60HZ |
AIR PRESS |
0.6~0.9MPa |
AIR COMPESSOR DISPLACEMENT |
≥2.5~3.0/min |
VOLOUM OF AIR COMPRESSOR AIR STORAGE |
1.5~2.0M3 |
2.5~3.0M3 |
WELDING DISTANCE SCOPE |
220-1000mm |
GEOCELL STRIP WIDTH |
220MM MAX (ADJUSTABLE ACCORDING TO THE SIZE OF WELDING HEAD) |
DAILY OUTPUT
(REF)
|
4500SQM |
4800SQM |
5000SQM |
5200SQM |
8000SQM |
Contact us if you need more details on Geocell. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Hdpe Geocell、High Tensile Strength Geocell. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : HDPE Geocell
